How to become a Bioengineers and Biomedical Engineer 2024

Bioengineers and Biomedical Engineer Apply knowledge of engineering, biology, chemistry, computer science, and biomechanical principles to the design, development, and evaluation of biological, agricultural, and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.

Bioengineers and Biomedical Engineer is Also Know as

In different settings, Bioengineers and Biomedical Engineer is titled as

Biomedical Electronics Technician
Biomedical Engineer
Biomedical Engineering Technician
Biomedical Equipment Technician (BMET)
Biomedical Technician
Engineer
Process Engineer
Research Engineer
Research Scientist

Education and Training of Bioengineers and Biomedical Engineer

Bioengineers and Biomedical Engineer is categorized in Job Zone Four: Considerable Preparation Needed

Experience Required for Bioengineers and Biomedical Engineer

A considerable amount of work-related skill, knowledge, or experience is needed for these occupations. For example, an accountant must complete four years of college and work for several years in accounting to be considered qualified.

Education Required for Bioengineers and Biomedical Engineer

Most of these occupations require a four-year bachelor's degree, but some do not.

Degrees Related to Bioengineers and Biomedical Engineer

Training Required for Bioengineers and Biomedical Engineer

Employees in these occupations usually need several years of work-related experience, on-the-job training, and/or vocational training.

Related Ocuupations

Some Ocuupations related to Bioengineers and Biomedical Engineer in different industries are

What Do Bioengineers and Biomedical Engineer do?

Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
Advise hospital administrators on the planning, acquisition, and use of medical equipment.
Research new materials to be used for products, such as implanted artificial organs.
Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
Adapt or design computer hardware or software for medical science uses.
Analyze new medical procedures to forecast likely outcomes.
Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
Advise manufacturing staff regarding problems with fermentation, filtration, or other bioproduction processes.
Collaborate with manufacturing or quality assurance staff to prepare product specification or safety sheets, standard operating procedures, user manuals, or qualification and validation reports.
Communicate with bioregulatory authorities regarding licensing or compliance responsibilities.
Communicate with suppliers regarding the design or specifications of bioproduction equipment, instrumentation, or materials.
Confer with research and biomanufacturing personnel to ensure the compatibility of design and production.
Consult with chemists or biologists to develop or evaluate novel technologies.
Design and deliver technology, such as prosthetic devices, to assist people with disabilities.
Design or conduct follow-up experimentation, based on generated data, to meet established process objectives.
Design or develop medical diagnostic or clinical instrumentation, equipment, or procedures, using the principles of engineering and biobehavioral sciences.
Design or direct bench or pilot production experiments to determine the scale of production methods that optimize product yield and minimize production costs.
Develop bioremediation processes to reduce pollution, protect the environment, or treat waste products.
Develop methodologies for transferring procedures or biological processes from laboratories to commercial-scale manufacturing production.
Develop statistical models or simulations, using statistical or modeling software.
Lead studies to examine or recommend changes in process sequences or operation protocols.
Maintain databases of experiment characteristics or results.
Manage teams of engineers by creating schedules, tracking inventory, creating or using budgets, or overseeing contract obligations or deadlines.
Prepare project plans for equipment or facility improvements, including time lines, budgetary estimates, or capital spending requests.
Prepare technical reports, data summary documents, or research articles for scientific publication, regulatory submissions, or patent applications.
Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances.
Recommend process formulas, instrumentation, or equipment specifications, based on results of bench or pilot experimentation.
Review existing manufacturing processes to identify opportunities for yield improvement or reduced process variation.

Qualities of Good Bioengineers and Biomedical Engineer

Written Comprehension: The ability to read and understand information and ideas presented in writing.
Inductive Reasoning: The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
Deductive Reasoning: The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity: The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
Oral Comprehension: The ability to listen to and understand information and ideas presented through spoken words and sentences.
Written Expression: The ability to communicate information and ideas in writing so others will understand.
Originality: The ability to come up with unusual or clever ideas about a given topic or situation, or to develop creative ways to solve a problem.
Oral Expression: The ability to communicate information and ideas in speaking so others will understand.
Mathematical Reasoning: The ability to choose the right mathematical methods or formulas to solve a problem.
Near Vision: The ability to see details at close range (within a few feet of the observer).
Information Ordering: The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
Category Flexibility: The ability to generate or use different sets of rules for combining or grouping things in different ways.
Speech Recognition: The ability to identify and understand the speech of another person.
Flexibility of Closure: The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
Visualization: The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
Fluency of Ideas: The ability to come up with a number of ideas about a topic (the number of ideas is important, not their quality, correctness, or creativity).
Speech Clarity: The ability to speak clearly so others can understand you.
Number Facility: The ability to add, subtract, multiply, or divide quickly and correctly.
Perceptual Speed: The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
Selective Attention: The ability to concentrate on a task over a period of time without being distracted.
Far Vision: The ability to see details at a distance.
Visual Color Discrimination: The ability to match or detect differences between colors, including shades of color and brightness.
Speed of Closure: The ability to quickly make sense of, combine, and organize information into meaningful patterns.
Memorization: The ability to remember information such as words, numbers, pictures, and procedures.
Time Sharing: The ability to shift back and forth between two or more activities or sources of information (such as speech, sounds, touch, or other sources).
Arm-Hand Steadiness: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
Finger Dexterity: The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
Depth Perception: The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
Control Precision: The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Auditory Attention: The ability to focus on a single source of sound in the presence of other distracting sounds.
Hearing Sensitivity: The ability to detect or tell the differences between sounds that vary in pitch and loudness.
Manual Dexterity: The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Wrist-Finger Speed: The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
Trunk Strength: The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
Extent Flexibility: The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
Response Orientation: The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
Multilimb Coordination: The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
Reaction Time: The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
Rate Control: The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
Spatial Orientation: The ability to know your location in relation to the environment or to know where other objects are in relation to you.
Sound Localization: The ability to tell the direction from which a sound originated.
Glare Sensitivity: The ability to see objects in the presence of a glare or bright lighting.
Peripheral Vision: The ability to see objects or movement of objects to one's side when the eyes are looking ahead.
Night Vision: The ability to see under low-light conditions.
Gross Body Equilibrium: The ability to keep or regain your body balance or stay upright when in an unstable position.
Gross Body Coordination: The ability to coordinate the movement of your arms, legs, and torso together when the whole body is in motion.
Dynamic Flexibility: The ability to quickly and repeatedly bend, stretch, twist, or reach out with your body, arms, and/or legs.
Stamina: The ability to exert yourself physically over long periods of time without getting winded or out of breath.
Dynamic Strength: The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue.
Explosive Strength: The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
Static Strength: The ability to exert maximum muscle force to lift, push, pull, or carry objects.
Speed of Limb Movement: The ability to quickly move the arms and legs.

Tools Used by Bioengineers and Biomedical Engineer

3T scanners
Accelerometers
Acoustic measurement systems
Acousto-optic modulators
Activity monitoring devices
Aerosol analyzers
Aerosol generators
Analytical balances
Anthropometers
Arbitrary waveform generators
Autoclaves
Automated particle counters
Automatic titrators
Autosamplers
Axial-torsional testing systems
Bacteria-based biosensors
Basic stamp microcontrollers
Bio-sensors
Bio-signal amplifiers
Bio-signal simulators
Biomagnetic imaging scanners
Biomedical device electrical safety testers
Biomimetic robots
Bioreactors
Biosafety cabinets
Bomb calorimeters
Camcorders
Capillary electrophoresis systems
Carbon dioxide CO2 incubators
Cardiovascular prosthetic device testers
Cell culture bioreactors
Centrifuges
Chemiluminescence analyzers
Circuit analyzers
Condensation nuclei counters CNC
Cone-plate viscometers
Confocal laser scanning microscopes
Contact angle goniometers
Defibrillator testing devices
Deflectors
Deoxyribonucleic acid DNA synthesizers
Desktop computers
Differential scanning calorimeters
Digital cameras
Digital luxmeters
Digital sonomicrometers
Dissolved oxygen polarographic measurement devices
Dissolved oxygen probes
Dynamometers
Electrical particle detectors
Electroblotting apparatus
Electrode bevelers
Electrode pullers
Electroencephalography EEG equipment
Electromyographs EMG
Electroplating apparatus
Electrosurgery testing devices
Ellipsometers
Endovascular stent-graft testing instruments
Environmental conditions measurement devices
Environmental growth chambers
Enzymatic membrane reactors
Enzyme-linked immunosorbent assay ELISA plate readers
Extruders
Eye tracking devices
Fast protein liquid chromatographs FPLC
Finger joint flexure testers
Flame ionization detectors FID
Flash point detectors
Flow control devices
Flow cytometers
Fluorescence microscopes
Fluorospectrometers
Footswitch sensors
Force platforms
Fourier transform infrared FTIR spectrometers
Freeze dryers
Frequency shifters
Functional magnetic resonance imaging fMRI scanners
Gas chromatographs GC
Gas flow control systems
Gel documentation systems
Glass micromolds
Grass stimulators
Grip dynamometers
Hardness testing devices
High pressure liquid chromatographs HPLC
High-speed digital cameras
Immuno-sensors
Impact testers
Incubator performance analyzers
Incubators
Insole sensors
Intravenous IV pump analyzers
Inverted light microscopes
Ion chromatographs
Ion exchange purification systems
Ion trap mass spectrometers
Isolators
Laminar flow hoods
Laptop computers
Laser ablation machines
Liquid handling robots
Load sensors
Low-pressure impactors
Magnetic resonance imaging MRI systems
Maskless photolithography equipment
Material fatigue and dynamics characterization devices
Material tension/compression testing devices
Medical radiation dosimeters
Microbial fermenters
Microcontrollers
Microelectrodes
Microfluidic networks
Micromanipulation microrheology microscopes
Micromolding lithography equipment
Microplate readers
Microplate spectrophotometers
Microplate washers
Microplating equipment
Micropumps
Microvalves
Milling machines
Molecular cytosensors
Molecular vacuum pumps
Motion actuators
Multi-axis kinematic knee simulators
Multi-photon microscopes
Multimeters
Non-invasive blood pressure monitor analyzers
Nuclear magnetic resonance NMR spectroscopes
Optical coherence tomography OCT scanners
Optical particle counters
Optical particle detectors
Optical tomographic imaging scanners
Optical traps
Opto-electronic electrogoniometers
Orbital shakers
Oscilloscopes
Oxygen meters
Pacemaker analyzers
Pacemaker testing devices
Particle size classifiers
Patient monitoring testing devices
Personal computers
pH meters
Physical conditioning treadmill exercisers
Piezoelectric ceramic transducers
Piezoelectric sensors
Pinch gauges
Plant photosynthesis meters
Plasma excitation chambers
Plastic injection molding machines
Polygraph recorders
Polymer matrices
Polymer scaffolds
Polymerase chain reaction PCR equipment
Positron emission tomography PET scanners
Posturographic measurement systems
Pressure and temperature measurement devices
Pressure sensors
Pressure transducers
Prosthetic limb testers
Protein gel electrophoresis
Pulsating bubble surfactometers PBS
Pulse oximeters
Quadrupole mass spectrometers
Quantum-based switching applications Q-switch electron waveguides
Radiation compliance testing devices
Radio frequency amplifiers
Rapid toxicity testing systems
Real-time polymerase chain reaction PCR equipment
Refractive index detectors
Rheometers
Scanning electron microscopes SEM
Scanning probe microscopes SPM
Servopneumatic actuators
Servopneumatic axial test instruments
Single photon emission computed tomography SPECT scanners
Skinfold calipers
Soft materials in-vitro simulation system
Spectrofluorimeters
Spinal disk implant wear testers
Spine simulators
Spirometers
Sterilization-in-place equipment
Strain gauge conditioners
Strain gauges
Sublimation printers
Sugar analyzers
Superconducting quantum interference devices SQUID
Surface area analyzers
Tensionmeters
Thermal cyclers
Torsiometers
Total organic carbon TOC analyzers
Toxic gas detectors
Two-point discriminators
Ultra high speed magnetic resonance imaging MRI scanner machines
Ultrasonic testing apparatus
Ultrasound imaging scanners
Ultrasound indention probes
Ultrasound transducers
Ultrasound wattmeters
Ultraviolet spectrometers
Ultraviolet spectrophotometers
Ventilator performance analyzers
Viscometers
X ray diffractometers
X ray lithography equipment
X ray machines

Technology Skills required for Bioengineers and Biomedical Engineer

Ab Initio
Ada
ADInstruments LabChart
Adobe Illustrator
Adobe Photoshop
Advanced computer simulation language ACSL
ANSYS simulation software
ApE A Plasmid Editor
AspenTech HYSYS
Autodesk AutoCAD
Biomechanical modeling software
Bioreactor Design
C
C++
Cadence Allegro Design Entry Capture and Capture CIS
Cadence Encounter Test
Calculating optimum maintenance parameters COMPARE
Calibration software
Charting software
Circuit simulation software
Common cause failure assessment software
Computational fluid dynamics CFD software
Computational modeling software
Computer aided design CAD software
Computer aided manufacturing CAM software
Criticality analysis software
Dassault Systemes SolidWorks
Defect tracking software
Diagramming software
Dyadem FMEA Pro-6
Electromechanical testing analysis software
Electromyograph analysis software
Electronic design automation EDA software
Embedded systems testing software
Equipment compliance testing software
ERP software
Extensible markup language XML
Failure mode and effects analysis FMEA software
Failure rate data in perspective FARADIP software
Failure rate database software
Fault modeling software
Fault tree analysis FTA software
Finite element analysis FEA software
Finite element method FEM software
Force platform software
Force sensitive applications FSA software
Fourier transform infrared FTIR software
Functional modeling software
Gait analysis software
Hardware description language HDL
Hierarchical simulation program with integrated circuit emphasis HSPICE
Human modeling software
Hypertext markup language HTML
Hypertext preprocessor PHP
IBM Rational ClearCase
IBM Rational ClearQuest
IBM Rational RequisitePro
Image analysis software
ImageJ
Instrument control software
Instrument validation software
Integrated development environment IDE software
Intelligen SuperPro Designer
JavaScript
Laboratory information management system LIMS
Linux
Lucidchart
Maplesoft Maple
Materials testing software
Mathsoft Mathcad
MathWorks Simulink
Mean time between failures MBTF software
Medical imaging software
Medical information software
Mentor Graphics software
Microsoft Access
Microsoft Azure software
Microsoft Excel
Microsoft Office software
Microsoft operating system
Microsoft Outlook
Microsoft PowerPoint
Microsoft Project
Microsoft Teams
Microsoft Visio
Microsoft Visual Basic
Microsoft Windows
Microsoft Word
Minitab
Molecular simulation software
Motion analysis software
National Instruments LabVIEW
Neural network modeling software
NeuroSolutions for MatLab
Numerical analysis software
Oracle Database
Oracle Java
OrCAD Capture
Polymath Software POLYMATH
Preventive maintenance software
Project estimation software
PTC Creo Elements/Pro
PTC Pro/ENGINEER Wildfire
Python
R
Rapid application development RAD software
Rapid prototyping software
Red Hat Enterprise Linux
Reliability centered maintenance RCM software
Requirements management software
Root cause analysis software
SAP BusinessObjects Crystal Reports
SAP software
SAS
SAS JMP
Schematic design entry software
Simulation program with integrated circuit emphasis SPICE
SNOINO RCM Pro
SNOINO Ttree
Software development tools
Splunk Enterprise
Stochastic modeling software
Stratasys FDM MedModeler
Structured query language SQL
System testing software
Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
Technis BETAPLUS
Test automation software
The MathWorks MATLAB
Thomson Reuters EndNote
Three-dimensional motion capture software
Unified modeling language UML
UNIX
User interface design software
Verilog
Virtual instrument software
Wolfram Research Mathematica
Word processing software
Zuken electrical design software

US Universities

How to become Bioengineers and Biomedical Engineer in 2024