Industrial Engineer Design, develop, test, and evaluate integrated systems for managing industrial production processes, including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
Industrial Engineer is Also Know as
In different settings, Industrial Engineer is titled as
- Continuous Improvement Engineer
- Engineer
- Facilities Engineer
- Industrial Engineer
- Operations Engineer
- Plant Engineer
- Process Engineer
- Project Engineer
- Quality Engineer
- Research and Development Engineer (R and D Engineer)
Education and Training of Industrial Engineer
Industrial Engineer is categorized in Job Zone Four: Considerable Preparation Needed
Experience Required for Industrial Engineer
A considerable amount of work-related skill, knowledge, or experience is needed for these occupations. For example, an accountant must complete four years of college and work for several years in accounting to be considered qualified.
Education Required for Industrial Engineer
Most of these occupations require a four-year bachelor's degree, but some do not.
Degrees Related to Industrial Engineer
- Bachelor in Systems Engineering
- Associate Degree Courses in Systems Engineering
- Masters Degree Courses in Systems Engineering
- Bachelor in Industrial Engineering
- Associate Degree Courses in Industrial Engineering
- Masters Degree Courses in Industrial Engineering
- Bachelor in Manufacturing Engineering
- Associate Degree Courses in Manufacturing Engineering
- Masters Degree Courses in Manufacturing Engineering
- Bachelor in Engineering/Industrial Management
- Associate Degree Courses in Engineering/Industrial Management
- Masters Degree Courses in Engineering/Industrial Management
- Bachelor in Packaging Science
- Associate Degree Courses in Packaging Science
- Masters Degree Courses in Packaging Science
Training Required for Industrial Engineer
Employees in these occupations usually need several years of work-related experience, on-the-job training, and/or vocational training.
Related Ocuupations
Some Ocuupations related to Industrial Engineer in different industries are
- Manufacturing Engineers
- Industrial Production Managers
- Validation Engineers
- Mechanical Engineers
- Electrical Engineers
- Mechatronics Engineers
- Electronics Engineers, Except Computer
- Logistics Engineers
- Materials Engineers
- Human Factors Engineers and Ergonomists
- Industrial Engineering Technologists and Technicians
- Mechanical Engineering Technologists and Technicians
- Calibration Technologists and Technicians
- Electrical and Electronic Engineering Technologists and Technicians
- Software Developers
- Project Management Specialists
- Production, Planning, and Expediting Clerks
- Team Assemblers
- Architectural and Engineering Managers
- Civil Engineering Technologists and Technicians
What Do Industrial Engineer do?
- Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product.
- Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization.
- Recommend methods for improving utilization of personnel, material, and utilities.
- Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
- Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
- Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer.
- Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.
- Communicate with management and user personnel to develop production and design standards.
- Formulate sampling procedures and designs and develop forms and instructions for recording, evaluating, and reporting quality and reliability data.
- Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems.
- Study operations sequence, material flow, functional statements, organization charts, and project information to determine worker functions and responsibilities.
- Direct workers engaged in product measurement, inspection, and testing activities to ensure quality control and reliability.
- Implement methods and procedures for disposition of discrepant material and defective or damaged parts, and assess cost and responsibility.
- Evaluate precision and accuracy of production and testing equipment and engineering drawings to formulate corrective action plan.
- Complete production reports, purchase orders, and material, tool, and equipment lists.
- Schedule deliveries based on production forecasts, material substitutions, storage and handling facilities, and maintenance requirements.
- Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operations.
- Estimate production costs, cost saving methods, and the effects of product design changes on expenditures for management review, action, and control.
- Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs.
- Confer with clients, vendors, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status.
Qualities of Good Industrial Engineer
- Written Comprehension: The ability to read and understand information and ideas presented in writing.
- Oral Expression: The ability to communicate information and ideas in speaking so others will understand.
- Written Expression: The ability to communicate information and ideas in writing so others will understand.
- Oral Comprehension: The ability to listen to and understand information and ideas presented through spoken words and sentences.
- Deductive Reasoning: The ability to apply general rules to specific problems to produce answers that make sense.
- Inductive Reasoning: The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
- Problem Sensitivity: The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
- Information Ordering: The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
- Near Vision: The ability to see details at close range (within a few feet of the observer).
- Category Flexibility: The ability to generate or use different sets of rules for combining or grouping things in different ways.
- Selective Attention: The ability to concentrate on a task over a period of time without being distracted.
- Speech Clarity: The ability to speak clearly so others can understand you.
- Speech Recognition: The ability to identify and understand the speech of another person.
- Fluency of Ideas: The ability to come up with a number of ideas about a topic (the number of ideas is important, not their quality, correctness, or creativity).
- Originality: The ability to come up with unusual or clever ideas about a given topic or situation, or to develop creative ways to solve a problem.
- Visualization: The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
- Number Facility: The ability to add, subtract, multiply, or divide quickly and correctly.
- Mathematical Reasoning: The ability to choose the right mathematical methods or formulas to solve a problem.
- Flexibility of Closure: The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
- Far Vision: The ability to see details at a distance.
- Perceptual Speed: The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
- Time Sharing: The ability to shift back and forth between two or more activities or sources of information (such as speech, sounds, touch, or other sources).
- Visual Color Discrimination: The ability to match or detect differences between colors, including shades of color and brightness.
- Auditory Attention: The ability to focus on a single source of sound in the presence of other distracting sounds.
- Hearing Sensitivity: The ability to detect or tell the differences between sounds that vary in pitch and loudness.
- Speed of Closure: The ability to quickly make sense of, combine, and organize information into meaningful patterns.
- Memorization: The ability to remember information such as words, numbers, pictures, and procedures.
- Arm-Hand Steadiness: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
- Reaction Time: The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
- Depth Perception: The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
- Control Precision: The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
- Multilimb Coordination: The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
- Rate Control: The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
- Finger Dexterity: The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
- Trunk Strength: The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
- Wrist-Finger Speed: The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
- Response Orientation: The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
- Stamina: The ability to exert yourself physically over long periods of time without getting winded or out of breath.
- Spatial Orientation: The ability to know your location in relation to the environment or to know where other objects are in relation to you.
- Static Strength: The ability to exert maximum muscle force to lift, push, pull, or carry objects.
- Gross Body Coordination: The ability to coordinate the movement of your arms, legs, and torso together when the whole body is in motion.
- Extent Flexibility: The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
- Dynamic Strength: The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue.
- Explosive Strength: The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
- Gross Body Equilibrium: The ability to keep or regain your body balance or stay upright when in an unstable position.
- Night Vision: The ability to see under low-light conditions.
- Manual Dexterity: The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Peripheral Vision: The ability to see objects or movement of objects to one's side when the eyes are looking ahead.
- Speed of Limb Movement: The ability to quickly move the arms and legs.
- Glare Sensitivity: The ability to see objects in the presence of a glare or bright lighting.
- Sound Localization: The ability to tell the direction from which a sound originated.
- Dynamic Flexibility: The ability to quickly and repeatedly bend, stretch, twist, or reach out with your body, arms, and/or legs.
Tools Used by Industrial Engineer
- Anechoic auditory test chambers
- Anthropometers
- Audio amplifiers
- Audio equalizers
- Audio tape recorders
- Audiometers
- Camera controllers
- Computer servers
- Coordinate measuring machines CMM
- Digital cameras
- Electrogoniometers
- Electrophysics infrared cameras
- Environmental ovens
- Fast Fourier transform FFT spectrum analyzers
- Force plates
- Hardness testers
- Heart rate monitors
- Heated environmental chambers
- Hydraulic power units
- Hydraulic presses
- Inverted metallurgical microscopes
- Laser printers
- Load cells
- Microcontrollers
- Motion control systems
- Multimeters
- Noise dosimeters
- Octave band analyzers
- Optical benches
- Oxygen uptake measurement devices
- Personal computers
- Photometer
- Potentiometers
- Pressure transducers
- Programmable logic controller PLC controlled turntables
- Programmable logic controllers PLC
- Pulsed width modulation PWM drives
- Radiometers
- Recording microphones
- Reverberant auditory test chambers
- Signal generators
- Sound level calibrators
- Sound level meters
- Tensile testers
- Thermocouples
- Time delay relay panel boxes
- Torsion meters
- Variable frequency drives VFD
- Vibration tables
Technology Skills required for Industrial Engineer
- 3D Static Strength Prediction Program 3DSSPP
- A mathematical programming language AMPL
- Allen Bradley PanelView
- Assembly line balancing software
- Autodesk AutoCAD
- Automatic dynamic incremental nonlinear analysis ADINA
- Bentley MicroStation
- C++
- Computer aided manufacturing CAM software
- Computer numerical control CNC software
- Dassault Systemes Abaqus
- Dassault Systemes CATIA
- Dassault Systemes SolidWorks
- Data acquisition software
- Dataxiom StatMost
- Decision support software
- Design of experiments DOE software
- Discrete event simulation software
- ECHIP
- EGS FeatureCAM
- Electronic breadboard software
- ETA Dynaform
- Extensible markup language XML
- Facilities design software
- Facilities planning software
- Finite element method FEM software
- GitHub
- Hewlett Packard LoadRunner
- Human machine interface HMI software
- Human modeling software
- IBM Notes
- ILOG CPLEX
- Integrated development environment IDE software
- International TechneGroup IGESworks
- Inventory management software
- JUnit
- Linux
- Logic programming software
- MAGMA MAGMASOFT
- Main Injector Neutrino Oscillation Search MINOS software
- Manhattan Associates PkMS Pickticket
- Maplesoft Maple
- Materials requirement planning MRP software
- Mathsoft Mathcad
- Maya HTT I-DEAS
- Microsoft Access
- Microsoft Excel
- Microsoft Office software
- Microsoft PowerPoint
- Microsoft Project
- Microsoft SharePoint
- Microsoft SQL Server
- Microsoft Visio
- Microsoft Visual Basic
- Microsoft Visual Basic for Applications VBA
- Microsoft Visual Basic Scripting Edition VBScript
- Microsoft Visual Studio
- Microsoft Word
- Minitab
- Modular arrangement of predetermined time standards software MODAPTS
- National Instruments LabVIEW
- Neural network modeling software
- NeuralWare
- Numerical control software
- Nupro CastView
- Optimization software
- Oracle Retek
- Personnel scheduling software
- PMC KanbanSIM
- Process reengineering software
- Production flow analysis software
- Production scheduling and planning software
- ProModel
- PTC Creo Parametric
- Python
- Quality control software
- R
- Robotic control software
- Robotic simulation software
- Rockwell Automation Arena
- Rockwell RSLogix
- SAP software
- SAS
- Shell script
- Siemens UGS Jack
- Statgraphics
- Statistical software
- Stratasys FDM MedModeler
- Structured query language SQL
- Sun Microsystems Java
- Supervisory control and data acquisition SCADA software
- Supply chain capacity planning software
- Task analysis software
- The MathWorks MATLAB
- Three-dimensional simulation translation software
- Time and motion analysis software
- UGS Solid Edge
- UNIX Shell
- User interface design software
- Warehouse management system WMS
- Windward Technologies GRG2
- Wolfram Research Mathematica
- Workcell simulation software
- Yield management systems